1.9 inch height 8×8 LED dot matrix, RGB color

Series No:





47.8 x 47.8 x 9

Dot height:(mm)

1.9 inch

Dot pitch:(mm)


Dot size:(mm)







The 1.9 inch height 8×8 RGB LED dot matrix is a game-changer in the world of digital displays. Offering vibrant color options and dynamic programming capabilities, the RGB LED matrix 8×8 has revolutionized how information and visual content are presented in various devices. From digital billboards to interactive installations, this advanced LED tri-color technology allows for a spectrum of colors, enabling creators and engineers to design with unprecedented freedom.

Innovative Features of the RGB LED Matrix 8×8

This versatile matrix display stands out for its ability to show a wide range of colors, from subtle hues to bright, vivid visuals. Each of the 64 LEDs can be individually controlled, not just for on/off states but across a spectrum of colors, thanks to the RGB capability, which mixes red, green, and blue to produce over 16 million shades.

Applications Across Industries

The utility of the 1.9 inch RGB LED matrix extends across various fields:

  • Advertising: Used in dynamic signage to capture and retain audience attention with flashing lights and color-changing effects.
  • Consumer Electronics: Enhances user interfaces on devices such as gaming consoles and smart watches.
  • Public Installations: Powers interactive art installations and public information displays that require robust, eye-catching visual output.

Benefits of Using the RGB LED Matrix

  • Enhanced Visibility: The bright and multi-colored outputs ensure excellent visibility even in well-lit conditions.
  • Energy Efficiency: Despite their vibrant outputs, RGB LEDs are energy-efficient, reducing overall operation costs.
  • Durability and Reliability: LEDs are known for their longevity and low maintenance requirements, making them ideal for both temporary and permanent installations.

Case Studies: Impactful Deployments

A notable application was seen in an urban public art project where the RGB LED matrix 8×8 was used to create an interactive light display that responded to environmental sounds. This installation not only enhanced the aesthetic appeal of the area but also engaged the community in a unique, immersive experience.

User Testimonials

Laura G., an electronics design engineer, states, “We chose the 1.9 inch RGB LED matrix for our latest handheld gaming device because of its compact size and color capabilities, which allowed us to drastically improve the user interface visuals, making gameplay much more engaging.”


The 1.9 inch height 8×8 RGB LED dot matrix represents a significant advancement in LED technology, offering both functionality and creativity in display solutions. Its impact is evident across various applications, proving its worth as a top choice for engineers and designers alike.

Call to Action

Elevate your projects with the vibrant and versatile RGB LED matrix 8×8. Contact us today to discover how our LED solutions can transform your visual display needs into stunning realities.

1.9 inch height 8x8 LED dot matrix, RGB color
1.9 inch height 8×8 LED dot matrix, RGB color


  • 1.9-Inch Matrix Height (46.80mm): Offers a suitable display area for clear visibility, ideal for applications requiring a moderate visual impact.
  • Dot Size: 4.80mm, Circle Dot: Clear, circular dots for enhanced visibility and aesthetic appeal.
  • Column and Row Configuration: 8 Columns x 8 Rows: A matrix of 64 individual dots allows for a wide range of display possibilities.
  • Dimensions (Width x Height): 47.80 x 47.80mm: Efficient size for effective display while maintaining space efficiency.
  • Bi-Color and RGB Color Selected: Ability to display in multiple colors, greatly enhancing the display’s versatility and visual appeal.
  • Low Current Operation: Energy-efficient, suitable for both battery-powered and low-power electronic devices.
  • High Contrast and Light Output: Ensures excellent readability in diverse lighting conditions.
  • Compatible with ASCII and EBCDIC Code: Can display a broad range of characters and symbols, increasing utility.
  • Stackable Horizontally: Allows for expanding the display area by aligning multiple units side by side.
  • Column Cathode and Column Anode Available: Offers flexibility in electronic design for various circuit integrations.
  • Easy Mounting on P.C. Boards or Sockets: Straightforward installation, facilitating efficient integration into electronic systems.
  • Categorized for Luminous Intensity: Consistent brightness levels across units for uniform display quality.
  • Technically Rugged: Durable and reliable, capable of enduring various operational environments.
  • Standard Design: Gray Surface and White Dot: Visually appealing with high contrast for ease of reading.
  • RoHS Compliance: Meets environmental safety standards.


  • Public Information Displays: Ideal for displaying information in airports, stations, or event venues.
  • Interactive Art and Installations: Suitable for creative displays in public spaces, galleries, or exhibitions.
  • Advertising and Retail Signage: Effective for dynamic and colorful displays in retail settings or for advertising purposes.
  • Industrial Displays: Appropriate for showing data, status messages, or alerts in industrial settings.
  • Educational Tools: Useful in educational settings for displaying visual aids or interactive content.
  • Healthcare Signage: Suitable for displaying patient information, room numbers, or alerts in healthcare facilities.
  • Safety and Emergency Signage: Appropriate for safety alerts, warning messages, or directional signs.
  • Transportation Systems: Effective for route numbers, schedules, or status updates in transportation networks.
  • Electronic Scoreboards: Perfect for sports arenas, gyms, or event spaces requiring clear and dynamic displays.
  • Gaming and Entertainment: Ideal for gaming consoles or entertainment systems requiring vibrant and customizable visual effects.

RoHs Compliance, Pb-free              Anti-Static Attention

Electrical-optical characteristics:
Filters Sort results
Reset Apply
Part No.(Row Cathode)
Part No. (Row Anode)
Peak Wavelength (nm)
Voltage typ. (v)
Voltage Max. (v)
Luminous Min.
Luminous typ.
Hi Red
ultra Blue
Package configuration & Internal circuit diagram
1.9 inch height 8x8 LED dot matrix, RGB color

All dimensions are in millimeters(inches)
Tolerance is +-0.25(0.01″) unless otherwise note
Specifications are subject to change without notice.

Partno description:

LED dot matrix is widely used in LED information board indoor and semi-outdoor

Part No of LED dot matrix

More Information

Reflector Surface color (1st number)/ dot Lens color (2nd number):

Ref Surface ColorWhiteBlackGrayRedGreen 
Dot Epoxy ColorWater clearWhite diffusedRed DiffusedGreen DiffusedYellow Diffused 

Absolute maximum ratings (Ta= 25°C)

Parameter SDUREYGUnit
Forward Current IF 252525252530mA
Power Dissipation Pd 606060606065mW
Reverse Voltage VR 555555V
Peak Forward Current IPF (Duty 1/10 @1KHZ) 150150150150150150mA
Operation Temperature TOPR-40 to +80°C
Storage Temperature TSTG-40 to +85°C
Lead Soldering Temperature TSOL  Max.260+ 5°C for 3 sec Max. ( 1.6mm from the base of the epoxy bulb)°C

Absolute maximum ratings (Ta= 25°C)

Forward Current IF3030303030303030mA
Power Dissipation Pd7565656575110120120mW
Reverse Voltage VR55555555V
Peak Forward Current IPF (Duty 1/10 @1KHZ)150150150150150150100100mA
Operation Temperature TOPR-40 to +80°C
Storage Temperature TSTG-40 to +85°C
Lead Soldering Temperature TSOLMax.260+ 5°C for 3 sec Max. ( 1.6mm from the base of the epoxy bulb)°C
Related Information

Applied for:
trainbus information boardLED screnmessage boardindustry instrument

1. Application
The Seven Segment LED is widely applied for ordinary electronic equipment (such as office equipment,
communication equipment and household applications). Checking with BETLUX’s Sales in
advance for information on applications in which exceptional reliability is required, particularly
when the failure or malfunction of the LEDs may directly jeopardize life or health (such as in
aviation, transportation, traffic control equipment, medical and life support systems and safety

2. Storage
The storage ambient for the Seven Segment LED should not exceed 30℃ temperature or 70% relative humidity.
For extended storage out of their original packaging, it is recommended that the Seven Segment LEDs be stored
in a sealed container with appropriate desiccant, or in a desiccator with nitrogen ambient.

3. Cleaning
Avoid using any unspecified chemical solvent to clean LED . For example, Trichloroethylene, Chlorosen, Acetone, and Diflon S3MC.
Any cleaning method can only be taken under normal temperature in one minute or less if it is required.
Use water to clean the Seven Segment LED if necessary under room temperature
dry it immediately after that.

Any unsuitable stress applied to the epoxy may break bonding wires in LED
Any forming on lead pin must be done before soldering, not during or after soldering.
Avoid applying any stress to resin in order to prevent the epoxy fracture and break on bonding wire.
While forming, please use a tie bar cut or equivalent to hold or bend the pin.
2mm from the base of resin is the minimum distance for the place bending the lead pin.
Avoid bending the lead pin at the same point twice or more.

seven segment display forming caution


When soldering, leave a minimum of 2mm clearance from the base of the base of the lens to the soldering point. Dipping the lens into the solder must be avoided.

Do not apply any external stress to the lead frame during soldering while the LED is at high temperature.

Recommended soldering conditions:


IR Reflow Soldering (for SMD display)Wave SolderingSoldering Iron
Pre-Heat150-180°CPre-Heat100°C Max.Temperature300°C Max.
Pre-Heat Time120sec Max.Pre-Heat Time60sec Max.
Peak Temperature260°C Max.SolderWave260°C Max.Soldering Time3sec Max.(one time only)
Soldering Time10 sec Max.Soldering Time5sec Max.

Note: Excessive soldering temperature and/or time might result in deformation of the LED lens or failure of the LED

ESD(Electrostatic Discharge)

Static Electricity or power surge will damage the LED.

Suggestions to prevent ESD (Electrostatic Discharge):

n Use a conductive wrist band or anti-electrostatic glove when handling these LEDs

n All devices, equipment, and machinery must be properly grounded

n Work tables, storage racks, etc. should be properly grounded

n Use ion blower to neutralize the static charge which might have built up on surface of the LED’s

 plastic lens as a result of friction between LEDs during storage and handling

ESD-damaged LEDs will exhibit abnormal characteristics such as high reverse leakage current, 

low forward voltage, or “no light on” at low currents. To verify for ESD damage, check for “light on” 

and Vf of the suspect LEDs at low currents.

The Vf of “good” LEDs should be>2.0V@0.1mA for InGaN product and >1.4V@0.1mA for AlInGaP


antistatic notice-smd led

LED dirve IC by  Maxim Integrated

 MAX6959  4½-Digit LED Display Driver

 MAX6958  4½-Digit LED Display Driver

 MAX6955  7-, 14-, 16-Segment LED Display Driver

 MAX6956  LED Static Display Driver and I/O Port

 MAX6954  7-, 14-, 16-Segment LED Display Driver

 MAX6952  5 x 7 Matrix LED Display Driver

 MAX6957  LED Static Display Driver and I/O Port

MAX6950  5-Digit LED Display Driver

 MAX6951  8-Digit LED Display Driver

 ICM7212  4-Digit LED Driver

 ICM7212A  4-Digit LED Driver

 ICM7212AM  4-Digit LED Driver

 ICM7212M  4-Digit LED Driver

 ICM7218A  8-Digit LED Driver

 ICM7218B  8-Digit LED Driver

 ICM7218C  8-Digit LED Driver

 ICM7218D  8-Digit LED Driver

 MAX7221  8-Digit LED Display Driver

 MAX7219  8-Digit LED Display Driver

 provide in-depth design and IC selection help for design engineers.  Each solution is dedicated to a popular end-equipment type and features design information, circuits and a block diagram.   Within a block diagram, click on a block to view best-fit integrated circuits recommended by Maxim engineers.

When selecting power for LED systems, it’s essential to understand several key parameters to ensure safe operation, longevity, and optimal performance. Here are some steps and considerations for LED power selection:

  • Determine the Forward Voltage (Vf) of the LED(s):

Each LED has a forward voltage, which is the voltage at which the LED operates when the current is flowing through it. This value can typically be found in the LED’s datasheet.

  • Determine the Forward Current (If) of the LED(s):

The forward current is the current at which the LED is designed to operate. Running an LED at higher than its rated current can reduce its lifespan and increase the heat it produces.

  • Decide on the Configuration:

Series Configuration: When LEDs are connected in series, the forward voltages add up, but the current remains the same.

Parallel Configuration: When LEDs are connected in parallel, the forward voltage remains the same, but the currents add up. This configuration can be risky because if one LED fails or has a slightly lower forward voltage, it can cause the other LEDs to draw more current.

Calculate Total Power Requirements:

Power (W) = Total Forward Voltage (V) x Total Forward Current (A)

For example, if you have three LEDs connected in series, each with a forward voltage of 3V and a forward current of 20mA, the total power requirement would be:

Power = (3V + 3V + 3V) x 20mA = 9V x 0.02A = 0.18W

  • Select an Appropriate Power Supply:
  • Voltage Rating: The power supply voltage should match or slightly exceed the total forward voltage of your LED configuration.
  • Current Rating: The power supply’s current rating should meet or exceed the total forward current of your LED configuration.
  • Safety Margin: It’s a good practice to select a power supply that can provide at least 20% more power than your calculated requirement. This ensures the power supply isn’t operating at its maximum capacity, which can extend its life and ensure safer operation.
  • Consider Additional Features:
  • Dimming Capability: If you want to control the brightness of your LEDs, choose a power supply with dimming capabilities.
  • Overcurrent and Overvoltage Protection: To protect your LEDs, select a power supply with built-in protection mechanisms.
  • Thermal Management: Ensure that the power supply has adequate cooling, especially if it will be enclosed or in a location with limited airflow.
  • Regulation and Efficiency:A power supply with good regulation will maintain a consistent voltage output despite variations in the load. High efficiency ensures minimal power is wasted as heat.
  • Physical Size and Form Factor:Depending on where you plan to place the power supply, its size and shape may be critical factors.

In summary, when selecting power for LED systems, understanding your LED’s requirements and the configuration you plan to use is essential. Then, pick a power supply that meets those needs with some added safety margin, keeping in mind any additional features or constraints relevant to your project.

Here are some well-regarded brands in the industry:

  • Mean Well: One of the most recognized brands in the LED power supply industry, Mean Well offers a wide range of products suitable for both indoor and outdoor applications. Their units often come with features like overcurrent protection, dimming capabilities, and high efficiency.
  • Tridonic: A global leader in lighting technology, Tridonic offers LED drivers and power supplies that cater to various lighting solutions, from simple setups to advanced smart lighting systems.
  • Philips Advance Xitanium: Philips is a well-known brand in the lighting industry, and their Xitanium series of LED drivers are known for reliability and performance. They cater to both indoor and outdoor LED applications.
  • Osram: Another giant in the lighting industry, Osram offers a range of LED drivers and power supplies suitable for various applications, including architectural and street lighting.
  • LIFUD: Specializing in LED drivers, LIFUD is known for its high-quality products that cater to both commercial and residential LED lighting solutions.
  • MOSO: This brand offers a variety of LED drivers, especially for outdoor and industrial applications. Their products are known for durability and performance.
  • TDK-Lambda: With a history in power electronics, TDK-Lambda offers a range of power supplies and LED drivers suitable for various applications, emphasizing reliability and advanced features.
Need help?
Scroll to Top