seven segment LED 0.4 inch 2 digit | Hi Red

Article No:



Hi Red



x x


Related Article List
Filters Sort results
Reset Apply
Article No
Ultra Blue
Super Red
Ultra Pure Green
Hi Red
Ultra Red
Ultra Green
Ultra Red
Ultra Red
Ultra Yellow
Ultra White
Ultra Amber
Product Series information
Filters Sort results
Reset Apply
Product Series
Series No:BL-D40A-23
Specification Download:
20.1 × 16 × 12 mm
0.40 inch double numeric LED display

Unveiling the Potential of Seven Segment LED 0.4 Inch 2 Digit Displays

In the digital era, the clarity and efficiency of displaying numerical data have paramount importance across various electronics applications. The seven segment LED 0.4 inch 2 digit displays have emerged as a fundamental component in this regard, blending simplicity with functionality. This comprehensive exploration is designed to shed light on the features, applications, benefits, alongside presenting case studies and user testimonials, to illustrate the transformative impact of these displays in the electronics sector.

The Essence of 7 Segments Display Technology

The 7 segments display, with its unique configuration, allows for the representation of numbers and a limited set of characters by illuminating specific segments. The 2 digit seven segment display datasheet reveals its capability to perform with high efficiency, which is critical for applications requiring compact and reliable numeric displays.

Core Features of the 0.4 Inch Display

The seven segment LED 0.4 inch 2 digit display, notable for its precision and compactness, offers a plethora of features including low power consumption, high brightness, and a wide viewing angle. These characteristics ensure that the display is versatile for both indoor and outdoor applications, under various lighting conditions.

Wide-Ranging Applications

From consumer electronics like digital watches and calculators to more sophisticated industrial control panels and medical devices, the utility of the 2 digit seven segment display is extensive. Its ability to provide clear and immediate numeric data makes it indispensable in environments where accuracy and readability are crucial.

The Advantages Unfolded

Integrating the seven segment LED 0.4 inch 2 digit displays into electronic devices not only enhances user experience through clear visibility but also contributes to the overall efficiency of the device. Their durability and low energy requirement offer an economical solution for long-term deployment in products.

Success Stories in Electronics

Case studies from various industries demonstrate the significant benefits these displays have brought to products and systems. From improving user interface in consumer electronics to enhancing operational reliability in industrial equipment, the impact of these displays is widespread.

Voices from the Field: User Testimonials

Feedback from electronics engineers and purchasers who have utilized these displays in their projects provides a testament to their functionality, reliability, and the value they add to electronic components and systems.

The Future Looks Bright

Looking ahead, the potential for 7 segments displays, especially the 0.4 inch 2 digit variants, continues to expand. Innovations in LED technology and digital display systems suggest an even broader application spectrum, with enhanced capabilities and performance.

Conclusion: Embracing the LED Segment Revolution

For electronics manufacturers, engineers, and purchasers, the seven segment LED 0.4 inch 2 digit display represents a blend of simplicity, efficiency, and reliability. This article reaffirms the value of these displays in the modern electronic landscape and encourages stakeholders to leverage their potential to the fullest.

Call to Action

Electronics professionals are encouraged to consider the seven segment LED 0.4 inch 2 digit displays for their next project to harness the benefits of high visibility, efficiency, and reliability in their products.
seven segment LED 0.4 inch 2 digit
seven segment LED 0.4 inch 2 digit


  • 0.40 Inch Digit Height (10.20mm): Offers clear and visible numeric displays, suitable for applications where compactness and readability are key.
  • Compact Dimensions: Measuring 20.10 x 16.00 mm, it's ideal for small-scale applications where space is at a premium.
  • Low Current Operation: Energy-efficient design, which is particularly beneficial in battery-operated or power-sensitive devices.
  • Common Anode and Common Cathode Availability: Provides flexibility in electronic design, accommodating different types of circuit configurations.
  • Excellent Character Appearance: Ensures sharp and clear numeric displays for ease of readability.
  • High Light Output: Bright display ensures visibility under various lighting conditions.
  • Easy Mounting on PC Boards or Sockets: Simplifies the process of integration onto printed circuit boards or into sockets, easing assembly.
  • IC Compatible: Can be easily interfaced with various integrated circuits, suitable for complex electronic systems.
  • Multicolor Availability: Available in different colors, offering options for customization and various design requirements.
  • Categorized for Luminous Intensity: Ensures uniform brightness across units for consistent performance.
  • Technically Rugged: Durable and reliable, built to withstand various operational conditions and environments.
  • Standard Design: Features a standard gray surface with white segments, offering a classic and clear display appearance.
  • RoHS Compliance: Manufactured in compliance with environmental and health safety standards.


  • Digital Clocks and Timers: Ideal for timekeeping devices in various settings such as schools, offices, or kitchen appliances.
  • Electronic Scoreboards: Suitable for sports arenas and event venues for displaying scores, times, or other numerical information.
  • Industrial Equipment: Used in machinery for displaying measurements, counts, or operational data.
  • Consumer Electronics: Incorporated in appliances like microwave ovens, washing machines, and other household devices for setting displays.
  • Medical Devices: Employed in medical equipment for showing readings, timers, and numerical data.
  • Automotive Displays: Applicable for displaying information on car dashboards, such as temperature, fuel level, or other indicators.
  • Control Panels: Used in control panels for machinery, HVAC systems, and industrial systems for clear numeric readouts.
  • Telecommunication Equipment: Suitable for network devices and communication equipment for displaying numeric information.
Dimension and Circuit Drawing:
Related Information


When soldering, leave a minimum of 2mm clearance from the base of the base of the lens to the soldering point. Dipping the lens into the solder must be avoided.

Do not apply any external stress to the lead frame during soldering while the LED is at high temperature.

Recommended soldering conditions:


IR Reflow Soldering (for SMD display)Wave SolderingSoldering Iron
Pre-Heat150-180°CPre-Heat100°C Max.Temperature300°C Max.
Pre-Heat Time120sec Max.Pre-Heat Time60sec Max.
Peak Temperature260°C Max.SolderWave260°C Max.Soldering Time3sec Max.(one time only)
Soldering Time10 sec Max.Soldering Time5sec Max.

Note: Excessive soldering temperature and/or time might result in deformation of the LED lens or failure of the LED

ESD(Electrostatic Discharge)

Static Electricity or power surge will damage the LED.

Suggestions to prevent ESD (Electrostatic Discharge):

n Use a conductive wrist band or anti-electrostatic glove when handling these LEDs

n All devices, equipment, and machinery must be properly grounded

n Work tables, storage racks, etc. should be properly grounded

n Use ion blower to neutralize the static charge which might have built up on surface of the LED’s

 plastic lens as a result of friction between LEDs during storage and handling

ESD-damaged LEDs will exhibit abnormal characteristics such as high reverse leakage current, 

low forward voltage, or “no light on” at low currents. To verify for ESD damage, check for “light on” 

and Vf of the suspect LEDs at low currents.

The Vf of “good” LEDs should be>2.0V@0.1mA for InGaN product and >1.4V@0.1mA for AlInGaP


antistatic notice-smd led

When selecting power for LED systems, it’s essential to understand several key parameters to ensure safe operation, longevity, and optimal performance. Here are some steps and considerations for LED power selection:

  • Determine the Forward Voltage (Vf) of the LED(s):

Each LED has a forward voltage, which is the voltage at which the LED operates when the current is flowing through it. This value can typically be found in the LED’s datasheet.

  • Determine the Forward Current (If) of the LED(s):

The forward current is the current at which the LED is designed to operate. Running an LED at higher than its rated current can reduce its lifespan and increase the heat it produces.

  • Decide on the Configuration:

Series Configuration: When LEDs are connected in series, the forward voltages add up, but the current remains the same.

Parallel Configuration: When LEDs are connected in parallel, the forward voltage remains the same, but the currents add up. This configuration can be risky because if one LED fails or has a slightly lower forward voltage, it can cause the other LEDs to draw more current.

Calculate Total Power Requirements:

Power (W) = Total Forward Voltage (V) x Total Forward Current (A)

For example, if you have three LEDs connected in series, each with a forward voltage of 3V and a forward current of 20mA, the total power requirement would be:

Power = (3V + 3V + 3V) x 20mA = 9V x 0.02A = 0.18W

  • Select an Appropriate Power Supply:
  • Voltage Rating: The power supply voltage should match or slightly exceed the total forward voltage of your LED configuration.
  • Current Rating: The power supply’s current rating should meet or exceed the total forward current of your LED configuration.
  • Safety Margin: It’s a good practice to select a power supply that can provide at least 20% more power than your calculated requirement. This ensures the power supply isn’t operating at its maximum capacity, which can extend its life and ensure safer operation.
  • Consider Additional Features:
  • Dimming Capability: If you want to control the brightness of your LEDs, choose a power supply with dimming capabilities.
  • Overcurrent and Overvoltage Protection: To protect your LEDs, select a power supply with built-in protection mechanisms.
  • Thermal Management: Ensure that the power supply has adequate cooling, especially if it will be enclosed or in a location with limited airflow.
  • Regulation and Efficiency:A power supply with good regulation will maintain a consistent voltage output despite variations in the load. High efficiency ensures minimal power is wasted as heat.
  • Physical Size and Form Factor:Depending on where you plan to place the power supply, its size and shape may be critical factors.

In summary, when selecting power for LED systems, understanding your LED’s requirements and the configuration you plan to use is essential. Then, pick a power supply that meets those needs with some added safety margin, keeping in mind any additional features or constraints relevant to your project.

Here are some well-regarded brands in the industry:

  • Mean Well: One of the most recognized brands in the LED power supply industry, Mean Well offers a wide range of products suitable for both indoor and outdoor applications. Their units often come with features like overcurrent protection, dimming capabilities, and high efficiency.
  • Tridonic: A global leader in lighting technology, Tridonic offers LED drivers and power supplies that cater to various lighting solutions, from simple setups to advanced smart lighting systems.
  • Philips Advance Xitanium: Philips is a well-known brand in the lighting industry, and their Xitanium series of LED drivers are known for reliability and performance. They cater to both indoor and outdoor LED applications.
  • Osram: Another giant in the lighting industry, Osram offers a range of LED drivers and power supplies suitable for various applications, including architectural and street lighting.
  • LIFUD: Specializing in LED drivers, LIFUD is known for its high-quality products that cater to both commercial and residential LED lighting solutions.
  • MOSO: This brand offers a variety of LED drivers, especially for outdoor and industrial applications. Their products are known for durability and performance.
  • TDK-Lambda: With a history in power electronics, TDK-Lambda offers a range of power supplies and LED drivers suitable for various applications, emphasizing reliability and advanced features.
Need help?
Scroll to Top