1206 SMD LED | V shape | reverse package | Ultra Pure Green

Article No:



Ultra Pure Green



x x


Related Article List
Filters Sort results
Reset Apply
Article No
ultra Blue
Water Clear
Ultra Pure Green
Water Clear
Ultra Red
Water Clear
Ultra Green
Water Clear
Ultra Red
Water Clear
Ultra Yellow
Water Clear
Product Series information
Filters Sort results
Reset Apply
Product Series
Series No:BL-LS3216B0E1
Specification Download:
3.2 × 1.6 × 1.4 mm
"Revolutionizing LED Technology: The Pioneering 1206 SMD V-Shape Reverse Package LEDs" Introduction In the constantly evolving landscape of LED technology, the 1206 SMD LEDs, especially those with a V-shape reverse package, have marked a significant innovation. These LEDs are not just components; they are at the forefront of lighting technology, offering unique advantages and applications. This article, tailored for electronics manufacturers, engineers, purchasers, and administrators, explores the features, applications, benefits, and real-world impacts of 1206 SMD V-shape reverse package LEDs, supplemented by case studies and user testimonials. Features of 1206 SMD LEDs in V-Shape Reverse Package The 1206 LEDs, known for their compact size and efficiency, have been further enhanced by the introduction of the V-shape reverse package. This unique design allows for better light dispersion and heat management, significantly improving their performance. These LEDs offer high brightness, energy efficiency, and a longer lifespan, making them a preferred choice in various electronic applications. Applications Across Diverse Domains The versatility of 1206 SMD V-shape reverse package LEDs is evident in their wide range of applications. They are widely used in consumer electronics for backlighting and status indicators. In automotive applications, these LEDs are utilized for dashboard lighting and external signaling. They also play a crucial role in industrial machinery, medical devices, and telecommunications equipment. Benefits of Using 1206 SMD V-Shape Reverse LEDs The primary benefits of these LEDs include their enhanced light dispersion, which allows for more uniform illumination in applications. Their compact design combined with efficient heat management leads to improved reliability and a longer operational life. Additionally, their energy efficiency translates into cost savings and a reduced environmental footprint. Case Studies: Demonstrating Real-World Impact A case study in the consumer electronics industry highlighted the use of these LEDs in a new range of ultra-thin televisions. The 1206 SMD V-shape reverse LEDs provided superior backlighting, contributing to the TVs' slim profile and vibrant display.
ultra-thin televisions
ultra-thin televisions
In the automotive sector, a leading car manufacturer integrated these LEDs into the interior lighting system of their latest models. The result was enhanced illumination quality, improving the aesthetic appeal and functionality of the vehicle interiors. User Testimonials Feedback from industry professionals emphasizes the value of these LEDs. An electronics design engineer praised the 1206 SMD LEDs for their ease of integration and superior light output, noting their impact on enhancing product features. A procurement manager from a medical device company emphasized the cost-effectiveness and reliability of these LEDs, citing them as a key component in their latest diagnostic equipment. Conclusion and Call to Action The 1206 SMD V-shape reverse package LEDs represent a significant leap forward in LED technology. For professionals in the electronics industry, adopting these LEDs means staying at the forefront of innovation and efficiency. Explore the potential of these advanced LEDs in your next project to elevate your products with cutting-edge lighting solutions. Features of 3.2mm x 1.6mm SMD LED (1.4mm Thickness):
  • Compact size: 3.2mm x 1.6mm x 1.4mm.
  • Mono-color type with ultra-brightness.
  • Compatibility with automatic placement equipment.
  • Wide viewing angle for versatile visibility.
  • Ideal for backlight and indicator applications.
  • Package: 3,000 pieces per reel.
  • RoHS compliance for environmental consideration.
  • Backlighting for displays.
  • Indicator lights in electronic devices.
  • Status indicators on circuit boards.
  • Consumer electronics.
  • Portable measurement instruments.
  • Automotive interior lighting.
  • Control panels.
  • Wearable technology.
  • General-purpose illumination.
  • Educational electronics projects.
Dimension and Circuit Drawing:
Related Information


When soldering, leave a minimum of 2mm clearance from the base of the base of the lens to the soldering point. Dipping the lens into the solder must be avoided.

Do not apply any external stress to the lead frame during soldering while the LED is at high temperature.

Recommended soldering conditions:


IR Reflow Soldering (for SMD display)Wave SolderingSoldering Iron
Pre-Heat150-180°CPre-Heat100°C Max.Temperature300°C Max.
Pre-Heat Time120sec Max.Pre-Heat Time60sec Max.
Peak Temperature260°C Max.SolderWave260°C Max.Soldering Time3sec Max.(one time only)
Soldering Time10 sec Max.Soldering Time5sec Max.

Note: Excessive soldering temperature and/or time might result in deformation of the LED lens or failure of the LED

ESD(Electrostatic Discharge)

Static Electricity or power surge will damage the LED.

Suggestions to prevent ESD (Electrostatic Discharge):

n Use a conductive wrist band or anti-electrostatic glove when handling these LEDs

n All devices, equipment, and machinery must be properly grounded

n Work tables, storage racks, etc. should be properly grounded

n Use ion blower to neutralize the static charge which might have built up on surface of the LED’s

 plastic lens as a result of friction between LEDs during storage and handling

ESD-damaged LEDs will exhibit abnormal characteristics such as high reverse leakage current, 

low forward voltage, or “no light on” at low currents. To verify for ESD damage, check for “light on” 

and Vf of the suspect LEDs at low currents.

The Vf of “good” LEDs should be>2.0V@0.1mA for InGaN product and >1.4V@0.1mA for AlInGaP


antistatic notice-smd led

When selecting power for LED systems, it’s essential to understand several key parameters to ensure safe operation, longevity, and optimal performance. Here are some steps and considerations for LED power selection:

  • Determine the Forward Voltage (Vf) of the LED(s):

Each LED has a forward voltage, which is the voltage at which the LED operates when the current is flowing through it. This value can typically be found in the LED’s datasheet.

  • Determine the Forward Current (If) of the LED(s):

The forward current is the current at which the LED is designed to operate. Running an LED at higher than its rated current can reduce its lifespan and increase the heat it produces.

  • Decide on the Configuration:

Series Configuration: When LEDs are connected in series, the forward voltages add up, but the current remains the same.

Parallel Configuration: When LEDs are connected in parallel, the forward voltage remains the same, but the currents add up. This configuration can be risky because if one LED fails or has a slightly lower forward voltage, it can cause the other LEDs to draw more current.

Calculate Total Power Requirements:

Power (W) = Total Forward Voltage (V) x Total Forward Current (A)

For example, if you have three LEDs connected in series, each with a forward voltage of 3V and a forward current of 20mA, the total power requirement would be:

Power = (3V + 3V + 3V) x 20mA = 9V x 0.02A = 0.18W

  • Select an Appropriate Power Supply:
  • Voltage Rating: The power supply voltage should match or slightly exceed the total forward voltage of your LED configuration.
  • Current Rating: The power supply’s current rating should meet or exceed the total forward current of your LED configuration.
  • Safety Margin: It’s a good practice to select a power supply that can provide at least 20% more power than your calculated requirement. This ensures the power supply isn’t operating at its maximum capacity, which can extend its life and ensure safer operation.
  • Consider Additional Features:
  • Dimming Capability: If you want to control the brightness of your LEDs, choose a power supply with dimming capabilities.
  • Overcurrent and Overvoltage Protection: To protect your LEDs, select a power supply with built-in protection mechanisms.
  • Thermal Management: Ensure that the power supply has adequate cooling, especially if it will be enclosed or in a location with limited airflow.
  • Regulation and Efficiency:A power supply with good regulation will maintain a consistent voltage output despite variations in the load. High efficiency ensures minimal power is wasted as heat.
  • Physical Size and Form Factor:Depending on where you plan to place the power supply, its size and shape may be critical factors.

In summary, when selecting power for LED systems, understanding your LED’s requirements and the configuration you plan to use is essential. Then, pick a power supply that meets those needs with some added safety margin, keeping in mind any additional features or constraints relevant to your project.

Here are some well-regarded brands in the industry:

  • Mean Well: One of the most recognized brands in the LED power supply industry, Mean Well offers a wide range of products suitable for both indoor and outdoor applications. Their units often come with features like overcurrent protection, dimming capabilities, and high efficiency.
  • Tridonic: A global leader in lighting technology, Tridonic offers LED drivers and power supplies that cater to various lighting solutions, from simple setups to advanced smart lighting systems.
  • Philips Advance Xitanium: Philips is a well-known brand in the lighting industry, and their Xitanium series of LED drivers are known for reliability and performance. They cater to both indoor and outdoor LED applications.
  • Osram: Another giant in the lighting industry, Osram offers a range of LED drivers and power supplies suitable for various applications, including architectural and street lighting.
  • LIFUD: Specializing in LED drivers, LIFUD is known for its high-quality products that cater to both commercial and residential LED lighting solutions.
  • MOSO: This brand offers a variety of LED drivers, especially for outdoor and industrial applications. Their products are known for durability and performance.
  • TDK-Lambda: With a history in power electronics, TDK-Lambda offers a range of power supplies and LED drivers suitable for various applications, emphasizing reliability and advanced features.
Need help?
Scroll to Top