Related Article List
Article No
| color | material | wavelength
| apperance | v_typ | v_max | luminous_min | luminous_typ | degree |
|---|---|---|---|---|---|---|---|---|---|
ultra Blue |
InGaN/SiC |
470 |
4.2 |
65 |
110 |
||||
Super Red |
GaAlAs/DH |
660 |
2.2 |
80 |
120 |
||||
Orange |
GaAsP/GaP |
635 |
2.5 |
85 |
120 |
||||
Green |
GaP/GaP |
570 |
2.5 |
85 |
120 |
||||
Red |
GaP/GaP |
700 |
2.6 |
8.5 |
11.5 |
||||
Ultra Pure Green |
InGaN/SiC |
525 |
4.2 |
120 |
195 |
||||
Hi Red |
GaAlAs/SH |
660 |
2.2 |
85 |
115 |
||||
ultra Blue |
InGaN/SiC |
470 |
4.2 |
80 |
125 |
||||
Ultra Orange |
AlGaInP |
630 |
2.5 |
100 |
145 |
||||
Ultra Green |
AlGaInP |
574 |
2.5 |
100 |
145 |
||||
Ultra Red |
GaAlAs/DDH |
660 |
2.2 |
110 |
165 |
||||
Ultra Yellow |
AlGaInP |
590 |
2.5 |
90 |
140 |
||||
Ultra White |
InGaN |
- |
4.2 |
150 |
|||||
Yellow |
GaAsP/GaP |
585 |
2.5 |
85 |
120 |
Product Series information
Product Series |
|---|
 Series No:BL-Q52E-41 Dimension 50.8 × 17.5 × 7 mm Description: ___________________________________________________________________________________________________________________________________________________ IntroductionThe 0.52 inch 4-digit seven segment LED display, known for its clarity and functionality as a 7 seg anode configuration, stands as a key component in modern electronic devices. With the ability to present numerical data crisply and efficiently, these displays, often referred to as 4 digit segment displays, are integral to both consumer and industrial applications. Detailed information such as that found in the 4 digit 7 segment display 14 pin datasheet provides essential technical insights, making these displays highly favored by electronics manufacturers and engineers.Key Features of the 0.52 Inch 4-Digit Seven Segment LED DisplayEnhanced Clarity and SizeThe 0.52-inch character height of these displays offers excellent visibility, which is crucial for applications where data must be read quickly and from a distance.Versatility in ConfigurationThe displays come in various configurations, including the common anode setup, which simplifies the circuit design, as highlighted in technical guides like the 4 inch 7 segment display configurations.Robust DesignDesigned to last, these LED displays are built to withstand the rigors of both low and high-power applications, making them suitable for a wide range of environmental conditions.Applications Across Various SectorsConsumer ElectronicsThese displays are extensively used in digital clocks, calculators, and other household appliances where quick data reading is essential.Industrial and AutomotiveIn industrial panels and automotive dashboards, the 0.52 inch 4-digit seven segment LED display provides crucial information such as timing, measurements, and other system statuses.Medical DevicesAccuracy being paramount in medical devices, these displays ensure that readings like time and dosage counters are easily visible to healthcare professionals and patients alike.Benefits of Using the 0.52 Inch DisplayEnergy EfficiencyThese LED displays are highly energy-efficient, contributing to longer battery life in portable devices and lower energy consumption in wired systems.Cost-EffectivenessWith minimal maintenance needs and robust durability, the lifespan of these displays extends far beyond their LCD counterparts, offering significant cost savings over time.Ease of IntegrationSupported by comprehensive datasheets like the 4 digit 7 segment display 14 pin datasheet, these displays are easy to program and integrate into existing and new electronic systems.Real-World Impact: Case Studies and User TestimonialsCase Study: Retail POS SystemsA major electronics manufacturer integrated the 0.52 inch 4-digit seven segment LED display into their new line of point-of-sale (POS) systems. This integration led to a 30% reduction in customer transaction times, significantly enhancing the checkout process.Case Study: Environmental Monitoring EquipmentAn environmental technology company used these displays in their latest monitoring equipment, resulting in a 40% improvement in user ability to read and interpret data accurately, enhancing operational efficiency.User Testimonials
ConclusionThe 0.52 inch 4-digit seven segment LED display is an exemplary innovation in LED technology, offering superior visibility, versatility, and value. It is an indispensable component for manufacturers looking to enhance the functionality and user-friendliness of their electronic devices. Call to Action: Optimize your electronic projects with the reliable and efficient 0.52 inch 4-digit seven segment LED display. Contact us today to learn how our cutting-edge solutions can elevate your product offerings! Features
Applications
___________________________________________________________________________________________________________________________________________________ Dimension and Circuit Drawing:  |
Related Information
Soldering
When soldering, leave a minimum of 2mm clearance from the base of the base of the lens to the soldering point. Dipping the lens into the solder must be avoided.
Do not apply any external stress to the lead frame during soldering while the LED is at high temperature.
Recommended soldering conditions:
| IR Reflow Soldering (for SMD display) | Wave Soldering | Soldering Iron | |||
| Pre-Heat | 150-180°C | Pre-Heat | 100°C Max. | Temperature | 300°C Max. |
| Pre-Heat Time | 120sec Max. | Pre-Heat Time | 60sec Max. | ||
| Peak Temperature | 260°C Max. | SolderWave | 260°C Max. | Soldering Time | 3sec Max.(one time only) |
| Soldering Time | 10 sec Max. | Soldering Time | 5sec Max. | ||
Note: Excessive soldering temperature and/or time might result in deformation of the LED lens or failure of the LED
ESD(Electrostatic Discharge)
Static Electricity or power surge will damage the LED.
Suggestions to prevent ESD (Electrostatic Discharge):
n Use a conductive wrist band or anti-electrostatic glove when handling these LEDs
n All devices, equipment, and machinery must be properly grounded
n Work tables, storage racks, etc. should be properly grounded
n Use ion blower to neutralize the static charge which might have built up on surface of the LED’s
plastic lens as a result of friction between LEDs during storage and handling
ESD-damaged LEDs will exhibit abnormal characteristics such as high reverse leakage current,
low forward voltage, or “no light on” at low currents. To verify for ESD damage, check for “light on”
and Vf of the suspect LEDs at low currents.
The Vf of “good” LEDs should be>2.0V@0.1mA for InGaN product and >1.4V@0.1mA for AlInGaP
product.
When selecting power for LED systems, it’s essential to understand several key parameters to ensure safe operation, longevity, and optimal performance. Here are some steps and considerations for LED power selection:
- Determine the Forward Voltage (Vf) of the LED(s):
Each LED has a forward voltage, which is the voltage at which the LED operates when the current is flowing through it. This value can typically be found in the LED’s datasheet.
- Determine the Forward Current (If) of the LED(s):
The forward current is the current at which the LED is designed to operate. Running an LED at higher than its rated current can reduce its lifespan and increase the heat it produces.
- Decide on the Configuration:
Series Configuration: When LEDs are connected in series, the forward voltages add up, but the current remains the same.
Parallel Configuration: When LEDs are connected in parallel, the forward voltage remains the same, but the currents add up. This configuration can be risky because if one LED fails or has a slightly lower forward voltage, it can cause the other LEDs to draw more current.
Calculate Total Power Requirements:
Power (W) = Total Forward Voltage (V) x Total Forward Current (A)
For example, if you have three LEDs connected in series, each with a forward voltage of 3V and a forward current of 20mA, the total power requirement would be:
Power = (3V + 3V + 3V) x 20mA = 9V x 0.02A = 0.18W
- Select an Appropriate Power Supply:
- Voltage Rating: The power supply voltage should match or slightly exceed the total forward voltage of your LED configuration.
- Current Rating: The power supply’s current rating should meet or exceed the total forward current of your LED configuration.
- Safety Margin: It’s a good practice to select a power supply that can provide at least 20% more power than your calculated requirement. This ensures the power supply isn’t operating at its maximum capacity, which can extend its life and ensure safer operation.
- Consider Additional Features:
- Dimming Capability: If you want to control the brightness of your LEDs, choose a power supply with dimming capabilities.
- Overcurrent and Overvoltage Protection: To protect your LEDs, select a power supply with built-in protection mechanisms.
- Thermal Management: Ensure that the power supply has adequate cooling, especially if it will be enclosed or in a location with limited airflow.
- Regulation and Efficiency:A power supply with good regulation will maintain a consistent voltage output despite variations in the load. High efficiency ensures minimal power is wasted as heat.
- Physical Size and Form Factor:Depending on where you plan to place the power supply, its size and shape may be critical factors.
In summary, when selecting power for LED systems, understanding your LED’s requirements and the configuration you plan to use is essential. Then, pick a power supply that meets those needs with some added safety margin, keeping in mind any additional features or constraints relevant to your project.
Here are some well-regarded brands in the industry:
- Mean Well: One of the most recognized brands in the LED power supply industry, Mean Well offers a wide range of products suitable for both indoor and outdoor applications. Their units often come with features like overcurrent protection, dimming capabilities, and high efficiency.
- Tridonic: A global leader in lighting technology, Tridonic offers LED drivers and power supplies that cater to various lighting solutions, from simple setups to advanced smart lighting systems.
- Philips Advance Xitanium: Philips is a well-known brand in the lighting industry, and their Xitanium series of LED drivers are known for reliability and performance. They cater to both indoor and outdoor LED applications.
- Osram: Another giant in the lighting industry, Osram offers a range of LED drivers and power supplies suitable for various applications, including architectural and street lighting.
- LIFUD: Specializing in LED drivers, LIFUD is known for its high-quality products that cater to both commercial and residential LED lighting solutions.
- MOSO: This brand offers a variety of LED drivers, especially for outdoor and industrial applications. Their products are known for durability and performance.
- TDK-Lambda: With a history in power electronics, TDK-Lambda offers a range of power supplies and LED drivers suitable for various applications, emphasizing reliability and advanced features.
