1206 SMD LED, IR LED
Article No:
Color:
Weight:(g/pcs)
Dimension:(mm)
Inquiry
Product Series information
Product Series |
---|
Series No:BL-LS3216C0E1IR Dimension 3.2 × 1.6 × 1.1 mm Description: ___________________________________________________________________________________________________________________________________________________ Introduction In the evolving world of electronic components, the 1206 SMD and IR LEDs stand out for their versatility and superior performance. Ideal for intricate applications requiring precise and efficient lighting solutions, these components are integral to modern electronics design. This article explores the features, applications, benefits, and real-world implications of 1206 SMD LEDs and IR LEDs, offering insights for electronics manufacturers, engineers, and purchasers.
Features of 1206 SMD and IR LEDsThe 1206 SMD LED, known for its small footprint (3.2 x 1.6 mm), offers high-density mounting capabilities and excellent luminous efficiency, which are crucial in compact device applications. IR LEDs, on the other hand, emit light in the infrared spectrum and are pivotal in applications requiring non-visible lighting. These LEDs are designed for robust performance and longevity, which is essential for applications that demand reliability over extended periods.Applications of 1206 SMD and IR LEDsBoth 1206 SMD and IR LEDs are used across a variety of industries. The 1206 SMD LEDs are commonly found in backlighting LCDs, automotive lighting, and mobile devices, providing bright, consistent light with minimal power usage. IR LEDs are critical in security cameras, remote control systems, and optical sensors, enabling efficient operation in the absence of visible light.Benefits of Using 1206 SMD and IR LEDsThe benefits of these LEDs are numerous. They are highly energy-efficient, reducing overall power consumption while providing superior light output. Their small size allows for greater design flexibility and innovation in developing new electronic devices. Additionally, the use of these LEDs can lead to significant cost savings in terms of both energy usage and maintenance, as they possess long operational lifespans.Case Studies: Effective Implementation of 1206 SMD and IR LEDsOne notable case study involves the use of 1206 SMD LEDs in portable medical devices, where they provided essential backlighting for screens, allowing for lightweight, energy-efficient designs. Another example is the application of IR LEDs in advanced security systems, where their ability to illuminate areas without visible light increased system effectiveness and reliability.User TestimonialsEngineers and designers frequently praise the 1206 SMD and IR LEDs for their reliability and performance. A lead engineer from a prominent automotive manufacturer stated, "The integration of 1206 SMD LEDs in our vehicle lighting systems has significantly enhanced visibility and energy efficiency." Similarly, a product developer in consumer electronics remarked, "Using IR LEDs in our remote control units has improved the responsiveness and battery life, enhancing user experience significantly."Conclusion and Call to ActionThe integration of 1206 SMD and IR LEDs is revolutionizing the electronics industry, providing innovative solutions that enhance product functionality and efficiency. If you're looking to upgrade your electronic designs or need reliable, high-performance lighting solutions, consider integrating these LEDs into your next project. Contact us today to explore our range of LED solutions and find the perfect fit for your needs. Features of 3.2mm x 1.6mm SMD Infrared Diode:
___________________________________________________________________________________________________________________________________________________ Dimension and Circuit Drawing: |
Related Article List
Related Information
Soldering
When soldering, leave a minimum of 2mm clearance from the base of the base of the lens to the soldering point. Dipping the lens into the solder must be avoided.
Do not apply any external stress to the lead frame during soldering while the LED is at high temperature.
Recommended soldering conditions:
IR Reflow Soldering (for SMD display) | Wave Soldering | Soldering Iron | |||
Pre-Heat | 150-180°C | Pre-Heat | 100°C Max. | Temperature | 300°C Max. |
Pre-Heat Time | 120sec Max. | Pre-Heat Time | 60sec Max. | ||
Peak Temperature | 260°C Max. | SolderWave | 260°C Max. | Soldering Time | 3sec Max.(one time only) |
Soldering Time | 10 sec Max. | Soldering Time | 5sec Max. |
Note: Excessive soldering temperature and/or time might result in deformation of the LED lens or failure of the LED
ESD(Electrostatic Discharge)
Static Electricity or power surge will damage the LED.
Suggestions to prevent ESD (Electrostatic Discharge):
n Use a conductive wrist band or anti-electrostatic glove when handling these LEDs
n All devices, equipment, and machinery must be properly grounded
n Work tables, storage racks, etc. should be properly grounded
n Use ion blower to neutralize the static charge which might have built up on surface of the LED’s
plastic lens as a result of friction between LEDs during storage and handling
ESD-damaged LEDs will exhibit abnormal characteristics such as high reverse leakage current,
low forward voltage, or “no light on” at low currents. To verify for ESD damage, check for “light on”
and Vf of the suspect LEDs at low currents.
The Vf of “good” LEDs should be>2.0V@0.1mA for InGaN product and >1.4V@0.1mA for AlInGaP
product.
When selecting power for LED systems, it’s essential to understand several key parameters to ensure safe operation, longevity, and optimal performance. Here are some steps and considerations for LED power selection:
- Determine the Forward Voltage (Vf) of the LED(s):
Each LED has a forward voltage, which is the voltage at which the LED operates when the current is flowing through it. This value can typically be found in the LED’s datasheet.
- Determine the Forward Current (If) of the LED(s):
The forward current is the current at which the LED is designed to operate. Running an LED at higher than its rated current can reduce its lifespan and increase the heat it produces.
- Decide on the Configuration:
Series Configuration: When LEDs are connected in series, the forward voltages add up, but the current remains the same.
Parallel Configuration: When LEDs are connected in parallel, the forward voltage remains the same, but the currents add up. This configuration can be risky because if one LED fails or has a slightly lower forward voltage, it can cause the other LEDs to draw more current.
Calculate Total Power Requirements:
Power (W) = Total Forward Voltage (V) x Total Forward Current (A)
For example, if you have three LEDs connected in series, each with a forward voltage of 3V and a forward current of 20mA, the total power requirement would be:
Power = (3V + 3V + 3V) x 20mA = 9V x 0.02A = 0.18W
- Select an Appropriate Power Supply:
- Voltage Rating: The power supply voltage should match or slightly exceed the total forward voltage of your LED configuration.
- Current Rating: The power supply’s current rating should meet or exceed the total forward current of your LED configuration.
- Safety Margin: It’s a good practice to select a power supply that can provide at least 20% more power than your calculated requirement. This ensures the power supply isn’t operating at its maximum capacity, which can extend its life and ensure safer operation.
- Consider Additional Features:
- Dimming Capability: If you want to control the brightness of your LEDs, choose a power supply with dimming capabilities.
- Overcurrent and Overvoltage Protection: To protect your LEDs, select a power supply with built-in protection mechanisms.
- Thermal Management: Ensure that the power supply has adequate cooling, especially if it will be enclosed or in a location with limited airflow.
- Regulation and Efficiency:A power supply with good regulation will maintain a consistent voltage output despite variations in the load. High efficiency ensures minimal power is wasted as heat.
- Physical Size and Form Factor:Depending on where you plan to place the power supply, its size and shape may be critical factors.
In summary, when selecting power for LED systems, understanding your LED’s requirements and the configuration you plan to use is essential. Then, pick a power supply that meets those needs with some added safety margin, keeping in mind any additional features or constraints relevant to your project.
Here are some well-regarded brands in the industry:
- Mean Well: One of the most recognized brands in the LED power supply industry, Mean Well offers a wide range of products suitable for both indoor and outdoor applications. Their units often come with features like overcurrent protection, dimming capabilities, and high efficiency.
- Tridonic: A global leader in lighting technology, Tridonic offers LED drivers and power supplies that cater to various lighting solutions, from simple setups to advanced smart lighting systems.
- Philips Advance Xitanium: Philips is a well-known brand in the lighting industry, and their Xitanium series of LED drivers are known for reliability and performance. They cater to both indoor and outdoor LED applications.
- Osram: Another giant in the lighting industry, Osram offers a range of LED drivers and power supplies suitable for various applications, including architectural and street lighting.
- LIFUD: Specializing in LED drivers, LIFUD is known for its high-quality products that cater to both commercial and residential LED lighting solutions.
- MOSO: This brand offers a variety of LED drivers, especially for outdoor and industrial applications. Their products are known for durability and performance.
- TDK-Lambda: With a history in power electronics, TDK-Lambda offers a range of power supplies and LED drivers suitable for various applications, emphasizing reliability and advanced features.